Arne Jacobsen Munkegaard Ceiling Lamp
  • Arne Jacobsen Munkegaard Ceiling Lamp
  • Arne Jacobsen Munkegaard Ceiling Lamp
Munkegaard appears as a glass disc hovering just below the ceiling, an image mainly created by the illuminated slot. The quality of the layered glass ensures an evenly lit surface, providing spaces with soft and diffused lighting.

Finish: High lustre chrome plated. White opal glass.
Material: Diffuser: White opal glass. Trim ring: High lustre chrome plated, brass.
Mounting: Ceiling thickness: Ø 265mm: 1-50mm, Ø 460mm/Ø 525mm: 1-55mm. Ceiling Cut-Out: Ø 265: 245mm, Ø 460: 440mm and Ø 535: 505mm. Terminal block: 1x5x2.5mm². Looping: Approved, max. 5x1,5mm² (Ø 265mm: Not approved for looping).
Weight: Max. 7kg.
Class: Ingress protection IP20. Electric shock protection I w. ground. F-mark: Yes.
Info notes: Emergency light possible for 3H, with or without autotest. For Ø 265 only with 1x32W. For Ø 460 + Ø 525 only with 22+40W. For further emergency versions, please contact the sales office.

Munkegaard

Designed for a school in Denmark - Minimalist design - High architectural adaptability - Floating glass disc illusion

Concept
The fixture resembles a glass disc hovering just below the ceiling. This impression is primarily created by the illuminated opening. The diffuser provides soft uniform lighting. This fixture gives the room the illusion of extra height.

Finish
High lustre chrome plated or satin chrome-plated. Prismatic acrylic or white opal glass.

Story behind the product
Arne Jacobsen designed Munkegaard for a school in Søborg, Denmark. Originally the fixture was designed for an incandescent bulb, but over the years the fixture has shown its flexibility by its ability to hold many new light sources. The design of this fixture is extremely minimalist, which makes the quality of the details even more important. Arne Jacobsen was a master when it came to the details in his designs.

Material
Diffuser: Matt white opal glass or prismatic acrylic. Trim ring: High lustre chrome plated or satin chrome-plated, brass.

Mounting
Termination: Ø 460/Ø 525: Terminal block 1x5x2.5mm², Ø 265: Plug 5x2.5mm². Ceiling thickness: Ø 265mm: 1-50mm, Ø 460mm/Ø 525mm: 1-55mm. Ceiling Cut-Out: Ø 265: 245mm, Ø 460: 440mm and Ø 525: 505mm. Looping: Approved, max. 5x1,5mm² (Ø 265mm: Not approved for looping). For more information please look at www.louispoulsen.com.

Weight
Max. 7kg.

Class
Ingress protection IP20. Electric shock protection I w. ground.

Info notes
Emergency light possible for 3H, with or without autotest. For Ø 265 only with 1x32 W. For Ø 460 + Ø 525 only with 22 +40W. For further emergency versions, please contact the sales office.



Munkegaard micro

Created out of the demand for a smaller adaptation of the Munkegaard - Gives floating illusion while providing a haloed backsplash against the ceiling - Uses the same platform as existing micro fixtures

Concept
The fixture emits diffuse and comfortable light directed downwards. The white opal glass disc provides an even illumination of the surface. The glass disc appears to hover below the ceiling, due to its suspended placement, allowing light to slip out through the gap between the disc and the fixture. This results in a different visual experience.

Finish
High lustre chrome plated or satin chrome-plated. White opal glass.

Story behind the product
Arne Jacobsen designed Munkegaard for a school in Søborg, Denmark. Originally the fixture was designed for an incandescent bulb, but over the years the fixture has shown its flexibility by its ability to hold many new light sources. The design of this fixture is extremely minimalist, which makes the quality of the details even more important. Arne Jacobsen was a master when it came to the details in his designs.


Material
Diffuser: White opal glass. Trim ring: Stainless steel.

Mounting
Ceiling thickness: 5-32mm. Ceiling cut-out: Ø 70mm. Terminal block: 1x2x4mm². Looping: Not approved. Ballast: Supplied without transformer. For more information please look at www.louispoulsen.com.

Weight
Max. 0.5kg.

Class
Ingress protection IP20. Electric shock protection III low voltage.

Info notes
Supplied with light source. The fitting is also approved for 35W, but then the fixture is not approved for mounting directly on flammable material. Ballast has to be ordered separately.


Munkegaard Mega

Created out of the demand for a larger adaptation of the Munkegaard - Gives floating illusion while providing a haloed backsplash against the ceiling - Provides soft and diffuse lighting

Concept
The fixture resembles a glass disc hovering just below the ceiling. This impression is primarily created by the illuminated opening. The diffuser provides soft uniform lighting. This fixture gives the room the illusion of extra height.

Finish
High lustre chrome plated or satin chrome-plated. White opal acrylic.

Story behind the product
Arne Jacobsen designed Mungegaard for a school in Søborg, Denmark. Originally the fixture was designed for an incandescent bulb, but over the years the fixture has shown its flexibility by its ability to hold many new light sources. The design of this fixture is extremely minimalist, which makes the quality of the details even more important. Arne Jacobsen was a master when it came to the details in his designs.

Material
Diffuser: White opal acrylic. Trim ring: High lustre chrome plated or satin chrome-plated, brass.

Mounting
Mounting hole: Ø 740 mm. Ceiling thickness: 1-55mm. Socketoutlet and plug: HF: Wieland 92.032.9658.1 GST 18i3F S2R. HF-D: Wieland 92.052.9658.1 GST 18i5F S2R. For more information please look at www.louispoulsen.com.

Weight
Max. 8kg.

Class
Ingress protection IP20. Electric shock protection I w. ground.

Info notes
Supplied with matching Wieland female outlet.

Design:
Arne Jacobsen

Manufacturer:
Louis Poulsen